CASE Mini Excavators: Compact Power Meets Taurox Performance
When the job calls for compact strength, CASE mini excavators show up. From tight-space trenching to cleanup and finish work, these machines are built for versatility, power, and operator comfort. And when paired with the right Taurox attachments, you get even more performance out of every pass.
Let’s break down each CASE model and which Taurox tools pair best.
CX15EV – Compact & Electric Efficiency
Weighing in at 3,186 lbs with 21.5 hp (electric), the CX15EV is ideal for urban and indoor work. It’s fully electric, compact, and delivers quiet power without emissions perfect for low-noise, low-carbon job sites.
Compatible Taurox Attachments (1–2 Ton):
Digging Buckets: 10", 12", 14", 16", 18"
Cleanup Buckets: 24", 30"
Tilt Bucket: 26"
Root Rake: 24"
Ripper
Hydraulic Breaker – Heavy Duty
Plate Compactor – Heavy Duty
CX26C – Versatile & Transport-Friendly
With an operating weight of 5,520 lbs and 24.8 hp, the CX26C hits the sweet spot for size and transportability. Its zero tail swing and stability make it a go-to for utility contractors and landscape crews.
Compatible Taurox Attachments (2–3 Ton):
Digging Buckets: 12", 16", 18", 20", 24"
Cleanup Buckets: 30", 36"
Tilt Bucket: 30"
Root Rake: 30"
Ripper
Hydraulic Breaker – Heavy Duty
Plate Compactor – Heavy Duty
CX30C – Agile & Jobsite-Ready
Sitting just under 6,500 lbs with 24.8 hp, the CX30C offers extra reach and power without losing maneuverability. A great fit for hardscaping, trenching, or residential builds.
Compatible Taurox Attachments (2–4 Ton):
Digging Buckets: 12", 16", 18", 20", 24"
Cleanup Buckets: 30", 36"
Tilt Bucket: 30", 36"
Root Rake: 30"
Ripper
Hydraulic Breaker – Heavy Duty
Plate Compactor – Heavy Duty
CX37C – Stronger Dig, Still Compact
At 7,990 lbs and 24.4 hp, the CX37C brings serious power to mid-size mini ex work. It’s great for deeper utility work or tougher ground conditions where you need more bite.
Compatible Taurox Attachments (3–4 Ton):
Digging Buckets: 16", 18", 20", 24"
Cleanup Buckets: 36", 42"
Tilt Bucket: 36", 42"
Root Rake: 36"
Ripper
Hydraulic Breaker – Heavy Duty
Plate Compactor – Heavy Duty
CX42D – Stability & Dig Power
The CX42D (around 9,500 lbs) offers impressive breakout force and a smooth ride, with standard long arm and thumb-ready hydraulics. It’s a favorite for site prep and full-day trenching.
Compatible Taurox Attachments (4–6 Ton):
Digging Buckets: 18", 20", 24", 30"
Cleanup Buckets: 36", 42", 48"
Tilt Bucket: 42", 48"
Root Rake: 42"
Ripper
Hydraulic Breaker – Heavy Duty
Plate Compactor – Heavy Duty
CX50D – Built to Move Material
With more hydraulic power and smoother controls, the CX50D (roughly 11,000 lbs) is ready for serious grading, trenching, and lifting tasks.
Compatible Taurox Attachments (5–6 Ton):
Digging Buckets: 18", 24", 30", 36"
Cleanup Buckets: 42", 48", 54"
Tilt Bucket: 48", 54"
Root Rake: 48"
Ripper
Hydraulic Breaker – Heavy Duty
Plate Compactor – Heavy Duty
CX57C – Room to Dig Deeper
The CX57C pushes the envelope on what a mini excavator can do. At 12,270 lbs with 66.9 hp, it’s the largest in this lineup capable of supporting heavy attachments and deeper trenches.
Compatible Taurox Attachments (5–8 Ton):
Digging Buckets: 24", 30", 36"
Cleanup Buckets: 48", 54", 60"
Tilt Bucket: 54", 60"
Root Rake: 54"
Ripper
Hydraulic Breaker – Heavy Duty
Plate Compactor – Heavy Duty
Unlock More with the Right Fit
CASE machines work hard. Taurox makes sure your attachments do too. Whether you’re digging deep or cleaning up clean, every bucket, breaker, and compactor we build is engineered to match the job and the machine.
With the Cangini coupler being introduced into the USA and Canada, some CASE dealers and operators are faced with a coupler that does not fit the standard pin-grab attachments. Taurox can build headplates, ears, pins, or even whole attachments that are compatible with the Cangini coupler.
Need help choosing the right gear for your CASE mini excavator ?
Let’s build your perfect lineup.